After awhile, the cords on your window are going to break. But, with a little time and knowledge, you can figure out how to change a broken cord on a sash window all by yourself. To do the job, you'll need some nails, a flat head screw driver, putty knife, and small pry bar available to you.
First, take off the interior stop. This can be pried off with the putty knife or it can be unscrewed. Pull away the inner sash as carefully as possible. There are upward pieces inside the frame, called stile grooves, where the cords are tied in place. Pull them free and remove the weights. If it needs it, clean out the frame.
The third task is to open the parting strip from one of the jambs. A jamb is an upright support found in the window frame. This may be held in place with nails, so take care when pulling it off. Move the upper piece out of the way and take off the cords.
From here, the weather stripping must removed so that the weight pockets can be reached. Once the stripping is off, take out the weight pockets. These may be behind small metal plates, which also have to come off. Sometimes, there are no plates, in which case the weight pockets are behind the interior casing on both sides of the window.
Be sure to measure out the new cords before you replace them and cut the to the right length. Untie the old ones and add the new ones by sending them over the pulleys and then into the weights. Each weight has an eye, which a small bar you can loop the string around. Tie it off here. You can also use wire to help keep it in place.
Hold the weights in place by pulling them to the top of their pockets and putting a nail through them. Fasten it to the frame. Fasten the outer cords to their slots with screws. Next, replace the parting strip and take out the nails and the pulleys and then lift the sash. Tie the cords to the inner sash and then seal up the frame.
It may be wise to replace all the cords at once to save time, even if they are not all broken. Chains can be used instead of cords if desired. A person can save some money by doing this themselves.
First, take off the interior stop. This can be pried off with the putty knife or it can be unscrewed. Pull away the inner sash as carefully as possible. There are upward pieces inside the frame, called stile grooves, where the cords are tied in place. Pull them free and remove the weights. If it needs it, clean out the frame.
The third task is to open the parting strip from one of the jambs. A jamb is an upright support found in the window frame. This may be held in place with nails, so take care when pulling it off. Move the upper piece out of the way and take off the cords.
From here, the weather stripping must removed so that the weight pockets can be reached. Once the stripping is off, take out the weight pockets. These may be behind small metal plates, which also have to come off. Sometimes, there are no plates, in which case the weight pockets are behind the interior casing on both sides of the window.
Be sure to measure out the new cords before you replace them and cut the to the right length. Untie the old ones and add the new ones by sending them over the pulleys and then into the weights. Each weight has an eye, which a small bar you can loop the string around. Tie it off here. You can also use wire to help keep it in place.
Hold the weights in place by pulling them to the top of their pockets and putting a nail through them. Fasten it to the frame. Fasten the outer cords to their slots with screws. Next, replace the parting strip and take out the nails and the pulleys and then lift the sash. Tie the cords to the inner sash and then seal up the frame.
It may be wise to replace all the cords at once to save time, even if they are not all broken. Chains can be used instead of cords if desired. A person can save some money by doing this themselves.
About the Author:
Regardless of what sort of sash window repairs London locals require, it is as near as an Internet search. You can learn how to achieve sash cord repairs using local professionals and technicians.
0 comments:
Post a Comment