When the poor weather has caused damage your wood windows, or even the pounding of the heat of the summer sun, you are ready for wooden window restoration.
And the supplies you will need do not cost much. You will soon see that your efforts are paid off with newer looking windows for your home.
When older houses are left vacant for long periods of time, the owners sometimes neglect them or just forget. Your windows suffer, but this can be taken care of with a little bit of care.
So, to begin, if the wood is still firm and just needs cleaning up, just use a scraper, such as a paint scraper or a chisel to remove old putty from the window. Then remove all of the broken glass. Make note of whether or not sanding is needed, and sand the wood where necessary. Priming the bare wood in preparation of painting it is the best idea, as the new putty will adhere better to clean, freshly painted wood. You can use a water-based primer or oil-based.
After your glass is measured, add about one-eight of an inch to the width and the length of it to provide for clearance. The glass is then ordered, and you will find it in your neighborhood home and building center.
When the primer dries, your glass is ready to be installed. If you use thin beads of putty, this works out best. Place it in the groove for the glass. Then install the glass. Glazing points are also something of importance as you will need them placed just a bit from the corners and on the sides of the window for strength and security. Next you will need to putty the windows, and let it set for a couple of days, at least. The longer the better for the putty to dry. Scrape off any excess putty, and it ready to paint. Tape up the edges of the glass to protect that from the excess splatters, and paint your wooden window.
And there you have it. You have brought your window back to life with wooden window restoration. It was not difficult and the results are quite pleasing. Now the maintenance will be easy, and you will not need to do this again for a good many years.
And the supplies you will need do not cost much. You will soon see that your efforts are paid off with newer looking windows for your home.
When older houses are left vacant for long periods of time, the owners sometimes neglect them or just forget. Your windows suffer, but this can be taken care of with a little bit of care.
So, to begin, if the wood is still firm and just needs cleaning up, just use a scraper, such as a paint scraper or a chisel to remove old putty from the window. Then remove all of the broken glass. Make note of whether or not sanding is needed, and sand the wood where necessary. Priming the bare wood in preparation of painting it is the best idea, as the new putty will adhere better to clean, freshly painted wood. You can use a water-based primer or oil-based.
After your glass is measured, add about one-eight of an inch to the width and the length of it to provide for clearance. The glass is then ordered, and you will find it in your neighborhood home and building center.
When the primer dries, your glass is ready to be installed. If you use thin beads of putty, this works out best. Place it in the groove for the glass. Then install the glass. Glazing points are also something of importance as you will need them placed just a bit from the corners and on the sides of the window for strength and security. Next you will need to putty the windows, and let it set for a couple of days, at least. The longer the better for the putty to dry. Scrape off any excess putty, and it ready to paint. Tape up the edges of the glass to protect that from the excess splatters, and paint your wooden window.
And there you have it. You have brought your window back to life with wooden window restoration. It was not difficult and the results are quite pleasing. Now the maintenance will be easy, and you will not need to do this again for a good many years.
About the Author:
Learn how you can increase the value of your home fast with sash window repairs! You can complete the best sash window renovation London has to offer today!
0 comments:
Post a Comment